PDA

View Full Version : dirty viewfinder


NYY
02-12-2006, 09:33 AM
i have a canon 300d and i noticed a small speck of dust in my viewfinder that i couldnt get out simply by wiping the eyepiece. it isnt in my pictures, so i know its not on the sensor, but when i tried cleaning the mirrors, i made things worse (a lot worse). what can i use to clean the mirrors without putting more dust on them.?

NYY
02-12-2006, 09:41 AM
nevermind, my dad gave me a special cloth that's used for cleaning sunglasses' lenses and it worked fine

markc
02-12-2006, 11:16 AM
Be very, very careful when trying to clean a mirror!

Best not to touch it at all. If you must try something, use one of those hand bulbs and use a very gentle puff of air. Even compressed air can be too much. It's very easy to goof them up.

NYY
02-12-2006, 11:21 AM
what can happen if not too careful?

markc
02-12-2006, 12:00 PM
You can knock the mirror out of allignment and it won't flip correctly or won't show the correct view. I haven't done it myself, thankfully.

NYY
02-12-2006, 12:04 PM
Alright, thanks for the advice.

kemplefan
02-12-2006, 02:26 PM
i never touch the inards of my camera i only clean with air, and today i was shooting and my veiw finder was dirty, i though it was my lense, i cleaned the lens three times before i figured that it was the veiw finder

Iron Flatline
02-12-2006, 03:20 PM
The big difference about the in-camera mirror and what you know as a mirror from home is that the one at home is mirrored behind a layer of glass. The one in the camera actually has the mirror right on top - otherwise it would be too heavy, and the focal differences would have to be calculated differently. Anyway, the one inside the camera is hyper sensitive - as markc says: because of aligment and other mechanical issues, but also because if you touch it, getting your finger grease off is MUCH harder.